Maxilite LED Rear Stop Tail Reverse Light & Sequential Indicator Reflector Fog Pair + Load Resistors
LED combination lamps feature the latest sequential indicator technology! Designed as an all-in-one combination lamp, delivers stop/tail, reverse, fog, retro reflector and a sequential indicator that flashes progressively offering an increased level of safety. Constructed with durable polycarbonate lenses and housings, will survive the toughest environments. Designed with a multi-fit mount, they can be easily attached to horizontal or vertical mounting surfaces with a simple surface mount design or attached using the twin rear stud mount. Dust & water proof to IP67 and totally maintenance free, with a life span rated at 100,000 hours, a complete FIT and FORGET Solution.
RANGE FEATURES
- Multi-volt 10-30V DC input & low current draw
- Sequential Indicator function
- Brighter than conventional incandescent systems
- 100,000 hour LED life span with solid state technology
- Maintenance free
- Sealed polycarbonate lens & housing
- IP67 water and dust proof
- Supplied pre-wired with 500mm sheathed cable
- Simple surface or twin bolt mount design
- Retro reflector integrated into lens
- ADR/ECE approved for all functions
Specifications:
Description | Rectangle Stop/Tail/Ref Sequential Indicator Combination |
Functions | Stop/Tail/Sequential Indicator/Reflector/Fog |
Voltage Input | 10-30V |
Number of LED's | Indicator - 24 LED’s Stop/Tail - 14 LED’s Reverse - 12 LED’s Fog – 14 LED’s |
Current Draw Amps | Ind – 0.2A @ 13.8V DC S/T – 0.2/0.05A @ 13.8V DC Rev – 0.2A @ 13.8V DC Fog – 0.3A @ 13.8V DC |
Dimensions AxBxC | 283x100x29mm |
Lens Construction | Polycarbonate |
Housing Construction | Polycarbonate |
Mounting Type | Surface Mount |
Mounting Hole /Cut Out | 116mm |
Cable Length | 500mm Sheathed |
ADR Approval | Ind – ECE 2a-E9-01 16532 Stop/Tail – ECE R1-S1-E9-02 16532 Rev – ECE AR-E9-00 16532 Fog – ECE F1-E9-00 16532 Ref – ECE IB-E9-02 16532 |
Narva 12 Volt - Load Resistors (Pair)
When replacing incandescent globe type lights with LED, some vehicles may need LED resistors to stop the indicators rapid flashing or warning messages. Ideal for vehicles where L.E.D. replacement of standard incandescent globes causes system warning messages and rapid indicator flash patterns.
- Designed for late model 12v vehicles that display light failure warning.
- Draws same current as a 21 watt globe
- IP67 Shock/dust/water proof
- 5 Year Warranty
- Suitable for indicator and brake light circuits
Fitting Instructions:
Must be mounted on metal surface, the resistor can reach temperatures of up to 170 Celsius. You may require up to 1 resistor per function on each side. The resistor should always be wired between the input wires of the lamp, Not the chassis of the vehicle or trailer! If fitted to the chassis, a bad earth connection is possible and can result in problems with the lighting system of the vehicle.
Wire Colour Function:
Red/Blue Stop
Green Tail
Green/Brown Direction Indicator (Sequential)
Green/Purple Reverse
Red Rear Fog
Black Earth Return (-)